Solved: Re: How does RAID 10 affect IOPS? - Splunk Community

Monitoring Splunk

How can I calculate approximate expected IOPS once I have measured or estimated the IOPS for a drive?

1 Solution

Solution

For reads RAID 10 will give 100% of the read IOPS for all the drives, so for 4 disks with 210 IOPS, you would get 840 read IOPS.

For writes RAID 10 will give you 50% of the write IOPS for all the drives, so for 4 disks with 210 IOPS, you would get 420 write IOPS.

View solution in original post

Solution

For reads RAID 10 will give 100% of the read IOPS for all the drives, so for 4 disks with 210 IOPS, you would get 840 read IOPS.

For writes RAID 10 will give you 50% of the write IOPS for all the drives, so for 4 disks with 210 IOPS, you would get 420 write IOPS.

Updated! Thanks @sdvorak_splunk

Just to correct math write performance would be 420 IOPs. These numbers are ballpark but a good illustration. Thanks, Dart!

Get Updates on the Splunk Community!

Rounding off the Splunk Dashboard Contest

What does a contest-winning Splunk dashboard look like? In this case, it isn't in a browser tab at all. It ...

A Four Part Event Series: AI + Observability: AI Agents, LLMs, Apps, & Infrastructure

AI + Observability: AI Agents, LLMs, Apps, & Infrastructure The rapid evolution of artificial intelligence ...

Splunk Technical Support Is Moving to Cisco Support Tools

Introduction Splunk technical support is transitioning to Cisco’s support environment. This change brings ...