All Posts

Find Answers
Ask questions. Get answers. Find technical product solutions from passionate members of the Splunk community.

All Posts

It needs equal access as you have in GUI. If you need to access data then you need access to those indexes and same for internal indexes.  The only exception is that there are some scheduled reports... See more...
It needs equal access as you have in GUI. If you need to access data then you need access to those indexes and same for internal indexes.  The only exception is that there are some scheduled reports which have run as owner. Those should work when you have access to those reports. But if those aren’t scheduled then that’s not working.
Since it's the same index with two different source types, could be SPL build differentially? ------------------- index=firewall (sourcetype=collector OR sourcetype=metadata) enforcement_mode=bloc... See more...
Since it's the same index with two different source types, could be SPL build differentially? ------------------- index=firewall (sourcetype=collector OR sourcetype=metadata) enforcement_mode=block event_type="error" |table event_type, hostname, ip Thank you  
Hi @tony.lao If the reply helped answer your question, please click the “Accept as Solution” button on the reply. This confirmation that the question was answered alerts the community and helps bui... See more...
Hi @tony.lao If the reply helped answer your question, please click the “Accept as Solution” button on the reply. This confirmation that the question was answered alerts the community and helps build that bank of expertise for everyone in the community.  If the reply did not answer your question, jump back into the conversation to keep it going. 
host is a field sometimes populated by Splunk to identify where logs were ingested from - could this be your issue?
Hello @isoutamo  does this | tstats command requires to have data access or just internal logs? Thanks.  
Thank you. Because in different data source I see host name under different fields  i.e. in metadata "host1" and in collector just "host", I added rename index=firewall event_type="error" [sear... See more...
Thank you. Because in different data source I see host name under different fields  i.e. in metadata "host1" and in collector just "host", I added rename index=firewall event_type="error" [search index=firewall sourcetype="metadata" enforcement_mode=block | rename host1 as host |dedup host | table host | format] | table event_type, host, ip -------- Now I am back to square 1  - it runs but no events produced and never finish.
Sorry, I missed a line, try this index=firewall event_type="error" [search index=firewall sourcetype="metadata" enforcement_mode=block | dedup host | table host | format] | table event_type, host, ip
Thank you.  Unfortunately proposed change produced 0 events
I have soled the issue.    I needed to add quotes to the AccountType: | where AccountType IN ("$AccountType$")   I also needed to change the delimiter: <delimiter>,</delimiter>   This... See more...
I have soled the issue.    I needed to add quotes to the AccountType: | where AccountType IN ("$AccountType$")   I also needed to change the delimiter: <delimiter>,</delimiter>   This solved the problem for me! Thank you!
Try something like this index=firewall event_type="error" [search index=firewall sourcetype="metadata" enforcement_mode=block | dedup host | format] | table event_type, host, ip
| where ErrorType != ""
Its empty in the field .Attached screenshot. For some of the transaction we have multiple error type with empty values and with values. For the same transaction below events are there with empty and... See more...
Its empty in the field .Attached screenshot. For some of the transaction we have multiple error type with empty values and with values. For the same transaction below events are there with empty and with value. "timestamp" : "2024-03-21T17:33:53.993Z", "content" : { "ErrorType" : "", "ErrorMsg" : "" } "timestamp" : "2024-03-21T17:33:20.786Z", "content" : { "ErrorType" : "HTTP:NOT_FOUND", "ErrorMsg" : "HTTP /glimport' failed: not found (404)." },
So, it is expected to get the AccountTypes selected from the user on the dashboard from the multiselect filter. 
I need to identify hosts with errors, but only in block mode MY SPL --------- index=firewall event_type="error [search index=firewall sourcetype="metadata" enforcement_mode=block] | dedup host | ... See more...
I need to identify hosts with errors, but only in block mode MY SPL --------- index=firewall event_type="error [search index=firewall sourcetype="metadata" enforcement_mode=block] | dedup host | table event_type, host, ip   ------------------ each search works separately, but combined it seating on "parsing job"  with no result for long time. Thank you 
What does the $AccountType$ token expand to?
| stats count by query
After configuring content pack for VMware. I repeatedly get "duplicate entity aliases found". We are also collecting for TA-Nix. How can I fix the duplicate entity alias issue. I am running ITE 4.18.... See more...
After configuring content pack for VMware. I repeatedly get "duplicate entity aliases found". We are also collecting for TA-Nix. How can I fix the duplicate entity alias issue. I am running ITE 4.18.1 and Splunk app for content packs 2.10
Are these multivalue fields within the same event? By "empty" do you mean they contain the word "empty" or that they have no value (empty string) or that they don't exist? Please share some sample ... See more...
Are these multivalue fields within the same event? By "empty" do you mean they contain the word "empty" or that they have no value (empty string) or that they don't exist? Please share some sample (anonymised) events to illustrate what you mean.
Hey! I still get the same error. But thank you for trying! Let me know if something else clicks. Thank you.
The IN operator only works in the search command.  In where you must use the in function. | loadjob savedsearch="name:search:cust_info" | where in(AccountType,$AccountType$)