topic Re: What are some best practices for deploying new Splunk cluster step-by-step? in Deployment Architecture

What are some best practices for deploying new Splunk cluster step-by-step?

splunkreal — Wed, 23 Mar 2022 16:23:06 GMT

Hello guys,

I would like to have best practices regarding deploying new Splunk cluster V8, could you say if correct and in logical order?

1. Install Splunk on all nodes with non-root user (except if you want HF), verify ulimits

2. Configure one server "manager" with monitoring console, license master, deployer & deployment server roles

3. Configure Master Node (cluster master) on separate server

4. Configure peers, connect them to the MN

5. Configure search heads, connect them to the MN

6. Configure Universal forwarders

Thanks.

Re: What are some best practices for deploying new Splunk cluster step-by-step?

venky1544 — Wed, 23 Mar 2022 16:41:29 GMT

Hi @splunkreal

I guess this for your practise right the flow is correct

however i would not recommend deployment server and license server setup one one server if you have more than 50 clients where UF needs to be installed however for low volume deployment server is OK to be clubbed

try this link for reference

(http://wiki.splunk.com/Deploy:DeploymentServer)

http://wiki.splunk.com/Things_I_wish_I_knew_then

and also if you are configuring masternode step 4 and 5 should have sub steps indexer clustering and SH clustering

If you find the answer helpful, an karma is appreciated

Re: What are some best practices for deploying new Splunk cluster step-by-step?

gcusello — Wed, 23 Mar 2022 16:42:09 GMT

Hi @splunkreal,

yes the process is correct, only three things:

I'd add also the forwarding of all logs from all servers to the Indexers,
if the Deployment Servers has to manage more than 50 clients, it must be on a dedicated server,
if you have Heavy Forwarders, you have to install and configire them before Universal Forwarders.

Ciao.

Giuseppe

Re: What are some best practices for deploying new Splunk cluster step-by-step?

PickleRick — Wed, 23 Mar 2022 20:03:26 GMT

I don't agree that HF must be run as root. It doesn't need it.

Re: What are some best practices for deploying new Splunk cluster step-by-step?

splunkreal — Wed, 23 Mar 2022 22:46:14 GMT

If you need to open 514 port?

Re: What are some best practices for deploying new Splunk cluster step-by-step?

PickleRick — Thu, 24 Mar 2022 08:10:41 GMT

Yes, but that's not unique to HF. You can use UF to receive data on raw tcp/udp port. And still you can just open another, higher port, like 1514, 6514 or whatever. And even better - use a separate syslog-collecting layer like sc4s or rsyslog and send data to HEC from there.